HYDROBLASTING

Hydroblasting uses a stream of water to clean and polish the parts being processed. A fine glass media is used with the water to flow over the surface of the item and results in a much smoother finish than the dry blasting process. Filtered water in a closed system is used along with a rust inhibitor. It removes dirt, tarnish and oxidisation in a non destructive way and gently peens the surface to close the pores of the metal. The result is a satin polished look sometimes better than original finish which is resistant to dirt, fingerprints and tarnishing.  

BLAST CLEANING CAN BE USED TO PREPARE FOR

PAINTING

GALVANIZING

ELECTROPLATING

POWDER COATING

CERAMIC COATING

RUBBER BONDING

AFTER HYDROBLASTING WE RECOMMEND YOU PROCEED WITH PLATING, PAINTING OR SUITABLE PROCESS TO INHIBIT RUST SOON AFTER BLASTING AS OUR RUST INHIBITOR IS A TEMPORARY MEASURE. WE TAKE GREAT CARE TO DRY AND AIR CLEAN ALL PARTS BUT IT IS IMPORTANT FOR THE CUSTOMER TO ENSURE NO TRACES OF MEDIA RESIDUE REMAIN BEFORE REASSEMBLY OF ANY PARTS.

OUR BLAST CABINET IS 1200MM X 900 MM SO WE CAN HANDLE LARGER PARTS WITH NO PROBLEM.